PCM2900E
| Parameters | |
|---|---|
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2900 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Interface | Serial, USB |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.25V |
| Number of Bits | 16 |
| Supply Current-Max | 67mA |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.35V~5.25V |
| Voltage - Supply, Digital | 4.35V~5.25V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Height | 2mm |
| Length | 10.2mm |
PCM2900E Overview
Space-saving reasons have led to it being packaged in a 28-SSOP (0.209, 5.30mm Width) package. Tube packaging method is used. It can perform highly efficiently in various applications since it is a type of Stereo Audio. It uses a mounting type of Surface Mount. When the operating performance is set to -25°C~85°C, it can operate normally. 2 / 2 ADC / DAC is integrated into it. An analog circuit is supplied with a voltage of 4.35V~5.25V. There is a supply voltage of 4.35V~5.25V provided to the digital circuit. In order to avoid reflections off the end of the transmission line, 28 terminations are used. There are 28 pins on this device. There are 28 pins on it. Using its base part number PCM2900, it can be used to locate parts that are related. Mounted on a PCB based on the technology of Surface Mount. Ideally, the supply voltage should remain at 5.25V. There are 1 A/D converters used to convert the analog signals into digital signals. Electronic parts classified as Other Consumer ICs are located in this subcategory. A minimum supply voltage of 3.25V should be maintained. A power supply of 5V is required for operation. The device can operate with a voltage of 5V. There are 4 channels for transmitting data on it. An information storage system with 16 bits is provided. They can operate with ease if the supply current is kept below 67mA.
PCM2900E Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
PCM2900E Applications
There are a lot of Texas Instruments PCM2900E CODECs Interface ICs applications.
- Material handling
- Backstop gauging
- High-performance memory systems
- Code conversion
- High-performance memory system
- Chemical dosing pumps
- Data distribution
- Conveying
- Image denoising
- Rotating radar platforms
