PCM2901E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2901 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 4 |
| Interface | Serial, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 54mA |
| Number of Bits | 16 |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Number of Analog Outputs | 2 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM2901E Overview
Space-saving reasons have led to it being packaged in a 28-SSOP (0.209, 5.30mm Width) package. Tube is the packaging method used. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. It uses a mounting type of Surface Mount. Using 0°C~70°C as the operating performance allows it to operate normally. The board is integrated with 2 / 2 ADCs and DACs. In the analog circuit, the supply voltage is 3V~3.6V. Digital circuits are powered by 3V~3.6V supply voltages. 28 terminations prevent signals from reflecting off transmission lines. This device consists of a row of 28-pins. The board has 28 pins configured. Find more related parts by using its base part number PCM2901. Surface Mount technology is used for mounting it to a PCB. In order for the supply voltage to be maintained at 3.6V, it should be set to its maximum value. It is possible to convert analog signals into digital signals using 1 A/D converters. Subcategory Other Consumer ICs describes this electronic part. The minimum value of supply voltage should be maintained at 3V. 3.3V is the supply voltage that it can operate from. For data transmission, the device has 4 channels. 16 bits are used to store information. During any given time, a circuit should carry a current of 54mA. The device has 2 analog outputs.
PCM2901E Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of 0°C~70°C
2 / 2 ADCs / DACs
1 A/D converters
2 analog outputs
PCM2901E Applications
There are a lot of Texas Instruments PCM2901E CODECs Interface ICs applications.
- Multi-axis control
- Dynamic applications
- Microprocessor
- Textile manufacturing
- Automation
- Counting applications
- Pulp & paper mills
- Galvanometer scanners
- Material handling
- Medical & Lab Equipment
