PCM2901E/2K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2901 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | Serial, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Supply Current-Max | 70mA |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Number of Analog Outputs | 2 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM2901E/2K Overview
Due to space constraints, it is supplied in the 28-SSOP (0.209, 5.30mm Width) package. We have adopted the packaging method of Tape & Reel (TR). This electronic part is categorized as a type of Stereo Audio, making it capable of providing high-efficiency performance in a variety of applications. The mounting type is Surface Mount. A performance setting of 0°C~70°C allows it to operate normally. It consists of 2 / 2 ADCs/ DACs. There is a voltage supply of 3V~3.6V to the analog circuit. A 3V~3.6V supply voltage is applied to the digital circuit. There are 28 terminations used to prevent signals from reflecting off the end of the transmission line. Essentially, it is an electronic device with 28 pins. There are 28 pins configured on this board. Its base part number PCM2901 can be used to find more parts like it. Mounted on a PCB based on the technology of Surface Mount. Supply voltage should never exceed 3.6V. In order to convert analog signals into digital signals, 1 A/D converters are used. There is subcategory Other Consumer ICs for this electronic part. Minimum supply voltage should remain at 3V. Powered by a 3.3V supply voltage, it can run. The supply current kept below 70mA makes them operate in an easy way. A total of 2 analog outputs are available on the device.
PCM2901E/2K Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of 0°C~70°C
2 / 2 ADCs / DACs
1 A/D converters
2 analog outputs
PCM2901E/2K Applications
There are a lot of Texas Instruments PCM2901E/2K CODECs Interface ICs applications.
- High-performance memory system
- Conveying
- Dimensionality reduction
- Radiation therapy
- Registration mark timing
- Subtraction
- Chemical dosing pumps
- Anomaly detection
- Material handling
- Off-Highway Vehicles (OHV)
