PCM2901EG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2901 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | Serial, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Supply Current-Max | 70mA |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Number of Analog Outputs | 2 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM2901EG4 Overview
Space-saving is achieved by supplying it in the 28-SSOP (0.209, 5.30mm Width) package. Tube packaging method is used. Because it is a type of Stereo Audio, it delivers high-efficiency performance in many applications. A mounting type of Surface Mount is used for this device. Operating performance at 0°C~70°C makes it possible to operate normally. The unit is integrated with 2 / 2 ADCs / DACs. An analog circuit is supplied with a voltage of 3V~3.6V. Digital circuits are powered by 3V~3.6V supply voltages. Signals are prevented from reflecting off the transmission line's terminations by using 28 terminations. In electronic terms, it is a kind of 28-pin device. There are 28 pins on it. By using its base part number PCM2901, you can find more related parts. This device is mounted on a PCB which uses the Surface Mount technology. Ideally, the supply voltage should remain at 3.6V. To convert analog signals into digital signals, there are 1 A/D converters. The electronic part has been classified as Other Consumer ICs. Maintaining a minimum voltage of 3V is recommended. When the supply voltage is 3.3V, it can operate. It is easy to operate them since the supply current is kept below 70mA. It features 2 analog outputs.
PCM2901EG4 Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of 0°C~70°C
2 / 2 ADCs / DACs
1 A/D converters
2 analog outputs
PCM2901EG4 Applications
There are a lot of Texas Instruments PCM2901EG4 CODECs Interface ICs applications.
- Material handling
- Conveying
- Electronic circuits
- Motor speed /RPM readout
- X-Y positioning
- Missing value imputation
- Chemical dosing pumps
- Speed measurement
- Image denoising
- Off-Highway Vehicles (OHV)
