PCM2903E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2903 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 4 |
| Interface | Serial, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 70mA |
| Number of Bits | 16 |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM2903E Overview
Space-saving reasons have led to it being packaged in a 28-SSOP (0.209, 5.30mm Width) package. Tube packaging method is used. This electronic component is of the type Stereo Audio, allowing it to provide high-efficiency performance in various applications. The mounting type is Surface Mount. When the operating performance is set to 0°C~70°C, the system can operate normally. The board is integrated with 2 / 2 ADCs and DACs. A supply voltage of 3V~3.6V is applied to the analog circuit. Supply voltage is set to 3V~3.6V for the digital circuit. Transmission lines have 28 terminations to prevent signals from reflecting. 28-pin electronic devices are what it is. The pins are configured as 28. Using its base part number PCM2903, it can be used to locate parts that are related. Based on the Surface Mount technology, the module is mounted to a PCB. The maximum value of supply voltage should be maintained at 3.6V. Analog signals are converted into digital signals by A/D converters. The electronic part has been classified as Other Consumer ICs. It is recommended to maintain a voltage of 3V as the minimum value. The device can operate with a voltage of 3.3V. Transmission of data is through 4 channels. To store information, there are 16 bits available. Normally, a circuit will flow a current of 70mA over its entire length.
PCM2903E Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of 0°C~70°C
2 / 2 ADCs / DACs
1 A/D converters
PCM2903E Applications
There are a lot of Texas Instruments PCM2903E CODECs Interface ICs applications.
- War field flying robot with a using night-vision flying camera
- Material handling
- Electronic circuits
- Subtraction
- Magnetic positional control
- Data distribution
- Counting applications
- Ball screw positioning
- Translating the decimal values to the binary
- Converting
