PCM2904DBG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2904 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial, USB |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.25V |
| Nominal Supply Current | 67mA |
| Number of Bits | 16 |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.35V~5.25V |
| Voltage - Supply, Digital | 4.35V~5.25V |
| Signal to Noise Ratio (SNR) | 96 dB |
| Resolution (Bits) | 16 b |
| Number of Analog Inputs | 2 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
PCM2904DBG4 Overview
It is supplied in the 28-SSOP (0.209, 5.30mm Width) package for the purpose of space saving. It is adopted to package in the Tube way. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of Stereo Audio. Mounting type Surface Mount is used. Operating performance at -25°C~85°C makes it possible to operate normally. It is equipped with a total of 2 / 2 ADCs and DACs. The analog circuit receives 4.35V~5.25V as a supply voltage. A supply voltage of 4.35V~5.25V is applied to the digital circuit. In order to avoid reflections off the end of the transmission line, 28 terminations are used. It is a kind of 28-pin electronic device. There are 28 pins on this board. Using its base part number PCM2904, it can be used to locate parts that are related. It is mounted to a PCB based on the Surface Mount technology. The maximum value of supply voltage should be maintained at 5.25V. A part in this category is classified as subcategory Other Consumer ICs. The minimum value of supply voltage should be maintained at 3.25V. It operates with power supplies of 5V. Operating voltages as low as 5V can be used. In order to store information, 16 bits are provided. It features 2 analog inputs. Normally, a circuit will flow a current of 67mA over its entire length.
PCM2904DBG4 Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
2 analog inputs
PCM2904DBG4 Applications
There are a lot of Texas Instruments PCM2904DBG4 CODECs Interface ICs applications.
- Digital systems
- Flight simulators
- High-performance memory-decoding or data-routing applications
- CT and MRI scanning machinery
- Printing
- Elevators
- Motor feedback
- Anomaly detection
- Medical & Lab Equipment
- Addition
