PCM2906DBG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2906 |
| Pin Count | 28 |
| Power Supplies | 5V |
| Interface | Serial, USB |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.25V |
| Nominal Supply Current | 67mA |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.35V~5.25V |
| Voltage - Supply, Digital | 4.35V~5.25V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Height | 1.95mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM2906DBG4 Overview
Due to space constraints, it is supplied in the 28-SSOP (0.209, 5.30mm Width) package. This package uses the Tube packaging method. Because it is a type of Stereo Audio, it delivers high-efficiency performance in many applications. As far as mounting types are concerned, it uses Surface Mount. At -25°C~85°C, it can operate normally. 2 / 2 ADC / DAC is integrated into it. In the analog circuit, the supply voltage is 4.35V~5.25V. Supply voltage is set to 4.35V~5.25V for the digital circuit. The transmission line is terminated with 28 terminations to prevent reflection of signals. In electronic terms, it is a kind of 28-pin device. There are 28 pins on this board. Its base part number PCM2906 can be used to find more parts like it. Using Surface Mount technology, it is mounted to a PCB. 5.25V is the maximum value of supply voltage. Analog signals are converted into digital signals by A/D converters. A part in this category is classified as subcategory Other Consumer ICs. The minimum value of supply voltage should be maintained at 3.25V. A power supply of 5V is required for operation. It is expected that 67mA will flow normally through the circuit throughout its lifetime.
PCM2906DBG4 Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
PCM2906DBG4 Applications
There are a lot of Texas Instruments PCM2906DBG4 CODECs Interface ICs applications.
- Elevators
- Electronic circuits
- Wind turbines
- Steel mills
- Backstop gauging
- Flight simulators
- Semiconductor fabrication
- Off-Highway Vehicles (OHV)
- Timber products
- Speed measurement
