PCM2912PJT
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Weight | 72.801575mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.8mm |
| Base Part Number | PCM2912 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial, USB |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.35V |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.35V~5.25V |
| Voltage - Supply, Digital | 4.35V~5.25V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 92 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 90 |
| S/N Ratio, ADCs / DACs (db) Typ | 92 / 92 |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM2912PJT Overview
As a space saver, it comes in the 32-TQFP package. The packaging way of Tray is adopted. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. It employs Surface Mount as its mounting type. It is able to operate normally when the operating performance is set at -25°C~85°C. Integrated ADCs / DACs are available in 1 / 2. 4.35V~5.25V of supply voltage are applied to the analog circuit. 4.35V~5.25V is the supply voltage for the digital circuit. To prevent signals from reflecting off of the transmission line, there are 32 terminations. This device consists of a row of 32-pins. 32 pins are connected to it. More related parts can be found by using its base part number PCM2912. The chip is mounted to the PCB using the Surface Mount technology. 5.25V should be the maximum value of the supply voltage. There are 1 A/D converters used to convert the analog signals into digital signals. This electronic part is classified into the subcategory of Other Consumer ICs. Maintaining a minimum voltage of 4.35V is recommended. It operates with power supplies of 5V. It can be operated from a voltage of 5V. For converting digital signals into analog signals, there are 2 D/A converters.
PCM2912PJT Features
Embedded in the 32-TQFP package
Operating temperature of -25°C~85°C
1 / 2 ADCs / DACs
1 A/D converters
PCM2912PJT Applications
There are a lot of Texas Instruments PCM2912PJT CODECs Interface ICs applications.
- Pulp & paper mills
- Wire number reduction in a particular circuits
- Anomaly detection
- CNC machining
- Motor speed /RPM readout
- Spooling or level wind
- Code conversion
- Logical circuits
- Feature extraction
- Sawmills
