PCM3000E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM3000 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 50mA |
| Number of Bits | 18 |
| Data Interface | Serial |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.5V~5.5V |
| Voltage - Supply, Digital | 4.5V~5.5V |
| Power Consumption | 160mW |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 94 dB |
| Number of ADC Channels | 2 |
| Resolution (Bits) | 18 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 94 / 97 |
| S/N Ratio, ADCs / DACs (db) Typ | 94 / 98 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM3000E Overview
Due to space constraints, it is supplied in the 28-SSOP (0.209, 5.30mm Width) package. This package uses the Tube packaging method. Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. It employs Surface Mount as its mounting type. Operating performance -25°C~85°C permits it to function normally. It is integrated with 2 / 2 ADCs / DACs. An analog circuit is supplied with a voltage of 4.5V~5.5V. A supply voltage of 4.5V~5.5V is applied to the digital circuit. Transmission lines have 28 terminations to prevent signals from reflecting. There are 28 pins on this device. With 28 pins, it is configured. Its base part number PCM3000 can be used to find other parts that are related. The maximum value of supply voltage should be maintained at 5.5V. Digital signals are converted from analog signals using 1 A/D converters. This electronic part is classified into the subcategory of Other Consumer ICs. Minimum supply voltage should remain at 4.5V. Power supplies of 5V are required to operate it. The device is able to operate at 5V voltages. 18 bits are used to store information. Current flowing through a circuit on a regular basis is 50mA. As far as the analog values can be read at once, this ADC has 2 channels.
PCM3000E Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
PCM3000E Applications
There are a lot of Texas Instruments PCM3000E CODECs Interface ICs applications.
- Missing value imputation
- Wind turbines
- Microprocessor
- Half adders
- Switching function
- Electronics industry
- Chemical dosing pumps
- Textiles
- High-performance memory system
- Material handling
