banner_page

PCM3000E/2KG4

PCM3000E/2KG4 datasheet pdf and Interface - CODECs product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-PCM3000E/2KG4
  • Package: SSOP
  • Datasheet: PDF
  • Stock: 933
  • Description: PCM3000E/2KG4 datasheet pdf and Interface - CODECs product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Lead Free Lead Free
Package / Case SSOP
Surface Mount YES
Number of Pins 28
Weight 285.791543mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 28
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -25°C
Subcategory Other Consumer ICs
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.65mm
Pin Count 28
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade OTHER
Interface Serial
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 50mA
Resolution 2.25 B
Sampling Rate 48 ksps
Power Consumption 160mW
Number of A/D Converters 1
Signal to Noise Ratio (SNR) 94 dB
Number of ADC Channels 2
Width 5.3mm
Radiation Hardening No
RoHS Status RoHS Compliant

PCM3000E/2KG4 Overview


For space-saving purposes, it is packaged in SSOP. It is adopted to package in the Tape and Reel way. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of General Purpose. In order to avoid reflections off the end of the transmission line, 28 terminations are used. Essentially, it is an electronic device with 28 pins. The board has 28 pins configured. Ideally, the supply voltage should remain at 5.5V. Analog signals are converted to digital signals by means of 1 A/D converters. Electronic parts classified as Other Consumer ICs are located in this subcategory. A minimum supply voltage of 4.5V should be maintained. A power supply of 5V is required for operation. Operating voltages as low as 5V can be used. To keep normal operation, the operating temperature is set to 85°C. Temperatures above -25°C are set as the minimum to prevent malfunctions. It is expected that 50mA will flow normally through the circuit throughout its lifetime. ADC channels represent the number of analog values that can be read simultaneously.

PCM3000E/2KG4 Features


Embedded in the SSOP package
1 A/D converters

PCM3000E/2KG4 Applications


There are a lot of Texas Instruments PCM3000E/2KG4 CODECs Interface ICs applications.

  • Steel mills
  • Stagecraft
  • Automation
  • Image compression
  • Motor speed /RPM readout
  • Robotics
  • Full adders
  • High-performance memory systems
  • Aerospace
  • Motor feedback

Write a review

Note: HTML is not translated!
    Bad           Good