PCM3001E
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM3001 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 50mA |
| Number of Bits | 18 |
| Data Interface | Serial |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.5V~5.5V |
| Voltage - Supply, Digital | 4.5V~5.5V |
| Power Consumption | 160mW |
| Signal to Noise Ratio (SNR) | 94 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 18 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 94 / 97 |
| S/N Ratio, ADCs / DACs (db) Typ | 94 / 98 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
PCM3001E Overview
Space-saving is achieved by supplying it in the 28-SSOP (0.209, 5.30mm Width) package. The packaging way of Tube is adopted. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. A mounting type of Surface Mount is used for this device. Operating performance -25°C~85°C permits it to function normally. Integrated ADCs / DACs are available in 2 / 2. In the analog circuit, the supply voltage is 4.5V~5.5V. Supply voltage is set to 4.5V~5.5V for the digital circuit. Transmission lines have 28 terminations, which prevent signals from re-emitted. The device has 28 pins. It is configured with 28 pins. Find more related parts by using its base part number PCM3001. Maintain a maximum voltage of 5.5V. A part in this category is classified as subcategory Other Consumer ICs. Maintaining a minimum voltage of 4.5V is recommended. Power supplies of 5V are used to operate it. It is able to operate from the supply voltage of 5V. It is necessary to convert digital signals into analog signals by using 2 D/A converters. A total of 18 bits are provided for storing information. Normally, a circuit will flow a current of 50mA over its entire length.
PCM3001E Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
PCM3001E Applications
There are a lot of Texas Instruments PCM3001E CODECs Interface ICs applications.
- Multiplication
- Multi-axis control
- Textile manufacturing
- Wire number reduction in a particular circuits
- Image compression
- Switching function
- Robotics vehicle with the metal detector
- Stagecraft
- Full adders
- Autonomous vehicles & robots
