banner_page

PCM3001E/2K

PCM3001E/2K datasheet pdf and Interface - CODECs product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-PCM3001E/2K
  • Package: 28-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 160
  • Description: PCM3001E/2K datasheet pdf and Interface - CODECs product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 28-SSOP (0.209, 5.30mm Width)
Surface Mount YES
Number of Pins 28
Weight 285.791543mg
Operating Temperature -25°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
Type Stereo Audio
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Other Consumer ICs
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.65mm
Base Part Number PCM3001
Pin Count 28
Operating Supply Voltage 5V
Power Supplies 5V
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 50mA
Number of Bits 18
Data Interface Serial
Sampling Rate 48 ksps
Voltage - Supply, Analog 4.5V~5.5V
Voltage - Supply, Digital 4.5V~5.5V
Power Consumption 160mW
Number of A/D Converters 1
Signal to Noise Ratio (SNR) 94 dB
Number of ADC Channels 2
Resolution (Bits) 18 b
Sigma Delta Yes
Number of ADCs / DACs 2 / 2
Dynamic Range, ADCs / DACs (db) Typ 94 / 97
S/N Ratio, ADCs / DACs (db) Typ 94 / 98
Height 2mm
Length 10.2mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

PCM3001E/2K Overview


As a space saver, it comes in the 28-SSOP (0.209, 5.30mm Width) package. We have adopted the packaging method of Tape & Reel (TR). Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. A mounting type of Surface Mount is used for this device. When the operating performance is set to -25°C~85°C, it can operate normally. The unit is integrated with 2 / 2 ADCs / DACs. The analog circuit is powered by 4.5V~5.5V. 4.5V~5.5V is the supply voltage for the digital circuit. 28 terminations prevent signals from reflecting off transmission lines. Essentially, it is an electronic device with 28 pins. 28 pins are connected to it. Its base part number PCM3001 can be used to find more parts like it. Voltage should not exceed 5.5V. There are 1 A/D converters used to convert the analog signals into digital signals. Subcategory Other Consumer ICs describes this electronic part. Supply voltage should be maintained at 4.5V. A 5V power supply is needed to operate it. Operating voltages as low as 5V can be used. An information storage system with 18 bits is provided. There is normally a current of 50mA flowing through the circuit at any given time. As there are 2 channels for ADCs, there is a maximum number of analog values that can be read simultaneously.

PCM3001E/2K Features


Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters

PCM3001E/2K Applications


There are a lot of Texas Instruments PCM3001E/2K CODECs Interface ICs applications.

  • Off-Highway Vehicles (OHV)
  • Flight simulators
  • Web tensioning
  • CNC machining
  • Full adders
  • Microprocessor
  • Backstop gauging
  • Stagecraft
  • Food & beverage
  • Multiplication

Write a review

Note: HTML is not translated!
    Bad           Good