Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
28-SSOP (0.209, 5.30mm Width) |
Surface Mount |
YES |
Number of Pins |
28 |
Weight |
285.791543mg |
Operating Temperature |
-25°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
Type |
Stereo Audio |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Other Consumer ICs |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.65mm |
Base Part Number |
PCM3001 |
Pin Count |
28 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Nominal Supply Current |
50mA |
Data Interface |
Serial |
Sampling Rate |
48 ksps |
Voltage - Supply, Analog |
4.5V~5.5V |
Voltage - Supply, Digital |
4.5V~5.5V |
Power Consumption |
160mW |
Number of A/D Converters |
1 |
Signal to Noise Ratio (SNR) |
94 dB |
Number of ADC Channels |
2 |
Resolution (Bits) |
18 b |
Sigma Delta |
Yes |
Number of ADCs / DACs |
2 / 2 |
Dynamic Range, ADCs / DACs (db) Typ |
94 / 97 |
S/N Ratio, ADCs / DACs (db) Typ |
94 / 98 |
Height |
2mm |
Length |
10.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
PCM3001EG4 Overview
Space-saving is achieved by supplying it in the 28-SSOP (0.209, 5.30mm Width) package. Packaging is done in the form of a Tube. Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. The mounting type is Surface Mount. When the operating performance is set to -25°C~85°C, it is able to operate normally. It consists of 2 / 2 ADCs/ DACs. A supply voltage of 4.5V~5.5V is applied to the analog circuit. A 4.5V~5.5V supply voltage is applied to the digital circuit. The transmission line is terminated with 28 terminations to prevent reflection of signals. There are 28 pins on this device. There are 28 pins on this board. More related parts can be found by using its base part number PCM3001. Supply voltage should be maintained at 5.5V. As a result of analog signals being converted into digital signals, there are 1 A/D converters. This electronic part is classified into the subcategory of Other Consumer ICs. At a minimum, the voltage should be kept at 4.5V. Power supplies of 5V are required to operate it. The device is able to operate at 5V voltages. An average current of 50mA will flow through a circuit at any given time. Analog values can be read simultaneously by 2 channels of an ADC.
PCM3001EG4 Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
PCM3001EG4 Applications
There are a lot of Texas Instruments PCM3001EG4 CODECs Interface ICs applications.
- Oil & gas production
- Addition
- High-performance memory systems
- Spooling or level wind
- Timber products
- Robotics
- X-Y positioning
- RF-based home automation system
- Servo motors
- Flight simulators