PCM3002E/2K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 220.105698mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM3002 |
| Pin Count | 24 |
| Operating Supply Voltage | 3V |
| Power Supplies | 3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.4V |
| Number of Bits | 20 |
| Data Interface | Serial |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Power Consumption | 54mW |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 90 dB |
| Resolution (Bits) | 20 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 94 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 94 |
| Number of Analog Outputs | 2 |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM3002E/2K Overview
For space-saving reasons, it is supplied in a 24-SSOP (0.209, 5.30mm Width) package. It is adopted to package in the manner of Tape & Reel (TR). Because it is a type of Stereo Audio, it delivers high-efficiency performance in many applications. This device employs the mounting type Surface Mount. When the operating performance is set to -25°C~85°C, it is able to operate normally. In addition, it is equipped with 2 / 2 ADCs and DACs. 2.7V~3.6V of supply voltage are applied to the analog circuit. It receives a voltage of 2.7V~3.6V as its supply voltage. Signals are prevented from reflecting off the end of transmission lines by 24 terminations. The device has a 24-pin configuration. The board is configured with 24 pins. The base part number PCM3002 can be used to find related parts. In order for the supply voltage to be maintained at 3.6V, it should be set to its maximum value. There are 1 A/D converters used to convert the analog signals into digital signals. Subcategory Other Consumer ICs describes this electronic part. It is recommended to maintain a voltage of 2.4V as the minimum value. It operates with power supplies of 3V. Powered by a 3V supply voltage, it can run. In order to store information, 20 bits are provided. The device is equipped with 2 analog outputs.
PCM3002E/2K Features
Embedded in the 24-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
2 analog outputs
PCM3002E/2K Applications
There are a lot of Texas Instruments PCM3002E/2K CODECs Interface ICs applications.
- Pulp & paper mills
- Dimensionality reduction
- Digital systems
- Image compression
- RF-based home automation system
- Elevators
- Robotic arms
- Material handling
- High-performance memory systems
- Food & beverage
