PCM3010DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 220.105698mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM3010 |
| Pin Count | 24 |
| Power Supplies | 3.35V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 15mA |
| Data Interface | Serial |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 4.5V~5.5V |
| Voltage - Supply, Digital | 3V~3.6V |
| Power Consumption | 190mW |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 100 dB |
| Number of ADC Channels | 2 |
| Resolution (Bits) | 24 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 102 / 104 |
| S/N Ratio, ADCs / DACs (db) Typ | 100 / 104 |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM3010DBR Overview
As a space saver, it comes in the 24-SSOP (0.209, 5.30mm Width) package. Tape & Reel (TR) is the packaging method used. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. As a mounting type, it uses Surface Mount. A -25°C~85°C operating performance setting allows it to operate normally. The board is integrated with 2 / 2 ADCs and DACs. An analog circuit is supplied with a voltage of 4.5V~5.5V. A supply voltage of 3V~3.6V is applied to the digital circuit. There are 24 terminations used to prevent signals from reflecting off the end of the transmission line. It is a kind of 24-pin electronic device. The board has 24 pins configured. Its base part number PCM3010 can be used to find more related parts. In order for the supply voltage to be maintained at 5.5V, it should be set to its maximum value. In order to convert analog signals into digital signals, 1 A/D converters are used. This electronic part is classified into the subcategory of Other Consumer ICs. Maintaining a minimum voltage of 3V is recommended. Power supplies of 3.35V are required to operate it. Current flowing through a circuit on a regular basis is 15mA. There are 2 ADC channels which represent the number of analog values that can be read at the same time.
PCM3010DBR Features
Embedded in the 24-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
PCM3010DBR Applications
There are a lot of Texas Instruments PCM3010DBR CODECs Interface ICs applications.
- Chemical dosing pumps
- Textile manufacturing
- Timber products
- Automation
- CT and MRI scanning machinery
- Applications involving measuring wheels
- Metal forming & fabrication
- Motor feedback
- Food & beverage
- Dynamic applications
