PCM3060PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM3060 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Data Interface | Serial |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 4.5V~5.5V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Power Consumption | 160mW |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 99 dB |
| Resolution (Bits) | 24 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 99 / 104 |
| S/N Ratio, ADCs / DACs (db) Typ | 99 / 105 (Differential), 99 / 104 (Single-Ended) |
| Number of Analog Outputs | 2 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM3060PWRG4 Overview
It is supplied in the 28-TSSOP (0.173, 4.40mm Width) package for the purpose of space saving. It is adopted to package in the Tape & Reel (TR) way. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of Stereo Audio. Surface Mount is the mounting type employed by this device. It is able to operate normally when the operating performance is set at -25°C~85°C. It features 2 / 2 ADCs / DACs. The analog circuit receives 4.5V~5.5V as a supply voltage. Supply voltage is set to 2.7V~3.6V for the digital circuit. There are 28 terminations used to prevent signals from reflecting off the end of the transmission line. In terms of electronics, it is a 28-pin device. 28 pins are connected to it. More related parts can be found by using its base part number PCM3060. Maintain a maximum voltage of 5.5V. Converting analog signals to digital signals requires 1 A/D converters. It is recommended to maintain a voltage of 4.5V as the minimum value. It operates on a supply voltage of 3.3V. 5V is the supply voltage that it can operate from. The device is equipped with 2 analog outputs.
PCM3060PWRG4 Features
Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
2 analog outputs
PCM3060PWRG4 Applications
There are a lot of Texas Instruments PCM3060PWRG4 CODECs Interface ICs applications.
- Registration mark timing
- Metal forming & fabrication
- Analog to digital conversion in the analog decoder
- Feature extraction
- Flight simulators
- Conveying
- High-performance memory systems
- Wind turbines
- Half adders
- Spooling or level wind
