PCM3168APAP
| Parameters | |
|---|---|
| Signal to Noise Ratio (SNR) | 107 dB |
| Number of D/A Converters | 8 |
| Resolution (Bits) | 24 b |
| Number of Analog Inputs | 6 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 6 / 8 |
| Dynamic Range, ADCs / DACs (db) Typ | 107 / 112 (Differential), 104 / 112 (Single-Ended) |
| S/N Ratio, ADCs / DACs (db) Typ | 107 / 112 (Differential), 104 / 112 (Single-Ended) |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-PowerTQFP |
| Number of Pins | 64 |
| Weight | 258.207457mg |
| Manufacturer Package Identifier | PAP(S-PQFP-64) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | PCM3168 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Supply Current-Max | 210mA |
| Data Interface | Serial |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 4.5V~5.5V |
| Voltage - Supply, Digital | 3V~3.6V |
| Power Consumption | 1.16W |
PCM3168APAP Overview
As a space saver, it comes in the 64-PowerTQFP package. It is adopted to package in the Tray way. Because it is a type of Audio, it delivers high-efficiency performance in many applications. As a mounting type, it uses Surface Mount. At -40°C~85°C, it can operate normally. 6 / 8 ADCs and DACs are integrated into it. The analog circuit is provided with the supply voltage of 4.5V~5.5V. The digital circuit is provided with the supply voltage of 3V~3.6V. There are 64 terminations used to prevent signals from reflecting off the end of the transmission line. This is a 64-pin electronic device. It is configured with 64 pins. By using its base part number PCM3168, you can find more related parts. On a PCB based on Surface Mount technology, it is mounted. 5.5V should be the maximum value of the supply voltage. The electronic part has been classified as Other Consumer ICs. 3V should be the minimum value of supply voltage. Operating voltages as low as 5V can be used. Digital signals are converted into analog signals using 8 D/A converters. Supply currents kept below 210mA make them easy to operate. The device is equipped with 6 analog inputs.
PCM3168APAP Features
Embedded in the 64-PowerTQFP package
Operating temperature of -40°C~85°C
6 / 8 ADCs / DACs
6 analog inputs
PCM3168APAP Applications
There are a lot of Texas Instruments PCM3168APAP CODECs Interface ICs applications.
- CPU memory location identification
- Wire number reduction in a particular circuits
- Linear distance measurement
- Semiconductor fabrication
- Elevators
- CT and MRI scanning machinery
- Counting applications
- Oil & gas production
- Textile manufacturing
- Logical circuits
