PCM3794RHBTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.206235mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | PCM3794 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.71V |
| Data Interface | Serial |
| Sampling Rate | 50 ksps |
| Voltage - Supply, Analog | 2.4V~3.6V |
| Voltage - Supply, Digital | 1.71V~3.6V |
| Power Consumption | 7mW |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 93 |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM3794RHBTG4 Overview
Space-saving reasons have led to it being packaged in a 32-VFQFN Exposed Pad package. This package uses the Tape & Reel (TR) packaging method. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. It uses a mounting type of Surface Mount. Operating performance -40°C~85°C permits it to function normally. Integrated ADCs / DACs are available in 2 / 2. A supply voltage of 2.4V~3.6V is applied to the analog circuit. Digital circuits are powered by 1.71V~3.6V supply voltages. In order to prevent signal reflections from off the end of the transmission line, 32 terminations are used. 32-pin electronic devices are what it is. The pins are configured as 32. Its base part number PCM3794 can be used to find other parts that are related. Supply voltage should be maintained at 3.6V. Minimum supply voltage should remain at 1.71V. Voltage 3.3V is used for its power supply. It can be operated from a voltage of 3.3V. There are 2 D/A converters used to convert the digital signals into analog signals.
PCM3794RHBTG4 Features
Embedded in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
PCM3794RHBTG4 Applications
There are a lot of Texas Instruments PCM3794RHBTG4 CODECs Interface ICs applications.
- Analog to digital conversion in the analog decoder
- Multi-axis control
- Robotic arms
- Wind turbines
- Textiles
- RF-based home automation system
- Position measurement
- Off-Highway Vehicles (OHV)
- Rotating radar platforms
- Autonomous vehicles & robots
