PCM5310PAPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-PowerTQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 259.993477mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | PCM5310 |
| Output | VOLTAGE |
| Pin Count | 64 |
| Number of Channels | 4 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 9.45V |
| Min Supply Voltage | 3V |
| Data Interface | I2C, Serial |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Power Consumption | 360mW |
| Signal to Noise Ratio (SNR) | 95 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 24 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 4 / 4 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 95 / 100 |
| Output Code | BINARY/TWOS COMP |
| S/N Ratio, ADCs / DACs (db) Typ | 95 / 100 |
| Linear Coding | 24 |
| Input Code | BINARY/TWOS COMP |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM5310PAPR Overview
For space-saving reasons, it is supplied in a 64-PowerTQFP package. Tape & Reel (TR) is the packaging method used. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Audio. As a mounting type, it uses Surface Mount. Operating performance at -25°C~85°C makes it possible to operate normally. The unit is integrated with 4 / 4 ADCs / DACs. In the analog circuit, the supply voltage is 3V~3.6V. It receives a voltage of 3V~3.6V as its supply voltage. There are 64 terminations used to prevent signals from reflecting off the end of the transmission line. In electronic terms, it is a kind of 64-pin device. The board is configured with 64 pins. Its base part number PCM5310 can be used to find other parts that are related. Voltage should not exceed 9.45V. A minimum supply voltage of 3V should be maintained. There is 3.3V supply voltage for this device. In order to convert digital signals into analog signals, there are 2 D/A converters. Transmission of data takes place over 4 channels.
PCM5310PAPR Features
Embedded in the 64-PowerTQFP package
Operating temperature of -25°C~85°C
4 / 4 ADCs / DACs
PCM5310PAPR Applications
There are a lot of Texas Instruments PCM5310PAPR CODECs Interface ICs applications.
- Logical circuits
- Wind turbines
- Registration mark timing
- Speed measurement
- Analog to digital conversion in the analog decoder
- Magnetic positional control
- Chemical dosing pumps
- Multi-axis control
- Detecting interrupts in microprocesstor applications
- Spooling or level wind
