PCR0J182MCL1GS
| Parameters | |
|---|---|
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Surface Mount Land Size | 0.406Lx0.406W 10.30mmx10.30mm |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PCR |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | Polymer |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Applications | General Purpose |
| Voltage - Rated | 6.3V |
| Capacitance | 1800μF |
| Voltage - Rated DC | 6.3V |
| Depth | 10.3mm |
| Lead Pitch | 4.6mm |
| ESR (Equivalent Series Resistance) | 15mOhm |
| Voltage | 6.3V |
| Lifetime @ Temp | 4000 Hrs @ 125°C |
| Leakage Current | 3μA |
| Ripple Current | 3.6A |
| Life (Hours) | 4000 hours |
| Ripple Current @ High Frequency | 3.6A @ 100kHz |
| Dissipation Factor | 0.1 % |
| Diameter | 10mm |
| Height | 10mm |
| Height Seated (Max) | 0.394 10.00mm |
| Length | 10mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 1800μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCR series. This part is mounted in the way of Surface Mount. The type of the PCR0J182MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~125°C. Nichicon PCR0J182MCL1GS is suitable to conduct the ripple current at 3.6A. PCR0J182MCL1GS Capacitor is mounted by PCB, Surface Mount. The typical values of Voltage - Rated DC are 6.3V. PCR0J182MCL1GS Capacitor. There are 3μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 6.3V. The voltage for the part is specified as 6.3V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 125°C.
PCR Series
Capacitance: 1800μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~125°C
There are great quantities of applications of PCR0J182MCL1GS Aluminum Polymer Capacitors.
Typically, PCR0J182MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC Buffering
- PFC
- Motor Control
- Smoothing Noise Filtering
- Motor Start
- DC Link
- Power Factor Correction
- To enhance power efficiency
- Spot Welding
- To reduce power noise & signal noise
