PCS1C390MCL1GS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Surface Mount Land Size | 0.209Lx0.209W 5.30mmx5.30mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PCS |
| Size / Dimension | 0.197Dia 5.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | Polymer |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Applications | General Purpose |
| Voltage - Rated | 16V |
| Capacitance | 39μF |
| Voltage - Rated DC | 16V |
| ESR (Equivalent Series Resistance) | 35mOhm |
| Voltage | 16V |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Leakage Current | 125μA |
| Ripple Current | 2A |
| Life (Hours) | 5000 hours |
| Ripple Current @ High Frequency | 2A @ 100kHz |
| Diameter | 5mm |
| Height | 6mm |
| Height Seated (Max) | 0.236 6.00mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 39μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCS series. This part is mounted in the way of Surface Mount. The type of the PCS1C390MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PCS1C390MCL1GS is suitable to conduct the ripple current at 2A. PCS1C390MCL1GS Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 16V. PCS1C390MCL1GS Capacitor. There are 125μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 16V. The voltage for the part is specified as 16V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
PCS Series
Capacitance: 39μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PCS1C390MCL1GS Aluminum Polymer Capacitors.
Typically, PCS1C390MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Factor Correction
- Voltage Doubling
- PFC
- Frequency Converters
- Smoothing Noise Filtering
- To enhance power efficiency
- Bypassing Noise Filtering
- Motor Control
- DC Buffering
- Power Line Buffering
