PCV1C271MCL1GS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Number of Pins | 2 |
| Surface Mount Land Size | 0.327Lx0.327W 8.30mmx8.30mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PCV |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | Polymer |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Applications | General Purpose |
| Voltage - Rated | 16V |
| Capacitance | 270μF |
| Voltage - Rated DC | 16V |
| Lead Pitch | 3.2mm |
| ESR (Equivalent Series Resistance) | 26mOhm |
| Voltage | 16V |
| Lifetime @ Temp | 3000 Hrs @ 105°C |
| Leakage Current | 864μA |
| Ripple Current | 2.3A |
| Life (Hours) | 3000 hours |
| Ripple Current @ High Frequency | 2.3A @ 100kHz |
| Diameter | 8mm |
| Height | 12mm |
| Height Seated (Max) | 0.472 12.00mm |
| Length | 12mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 270μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCV series. This part is mounted in the way of Surface Mount. The type of the PCV1C271MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PCV1C271MCL1GS is suitable to conduct the ripple current at 2.3A. PCV1C271MCL1GS Capacitor is mounted by PCB, Surface Mount. The typical values of Voltage - Rated DC are 16V. PCV1C271MCL1GS Capacitor. There are 864μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 16V. The voltage for the part is specified as 16V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. There are 2 pins available in the part.
PCV Series
Capacitance: 270μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PCV1C271MCL1GS Aluminum Polymer Capacitors.
Typically, PCV1C271MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Decoupling Noise Filtering
- Audio Crossover
- PFC
- Flashtube Ignition
- Voltage Doubling
- Power Line Buffering
- DC Link
- Signal decoupling & power bypass
- To enhance power efficiency
- DC Buffering
