banner_page

PCX1C820MCL1GS

PCX Series 82μF 16V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR)


  • Manufacturer: Nichicon
  • Nocochips NO: 555-PCX1C820MCL1GS
  • Package: Radial, Can - SMD
  • Datasheet: PDF
  • Stock: 261
  • Description: PCX Series 82μF 16V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount PCB, Surface Mount
Mounting Type Surface Mount
Package / Case Radial, Can - SMD
Surface Mount Land Size 0.327Lx0.327W 8.30mmx8.30mm
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Published 2009
Series PCX
Size / Dimension 0.315Dia 8.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Type Polymer
Max Operating Temperature 125°C
Min Operating Temperature -55°C
Applications General Purpose
Voltage - Rated 16V
Capacitance 82μF
Voltage - Rated DC 16V
Lead Pitch 3.2mm
ESR (Equivalent Series Resistance) 45mOhm
Lead Diameter 1.1 mm
Voltage 16V
Lifetime @ Temp 3000 Hrs @ 125°C
Leakage Current 262μA
Ripple Current 1.3A
Life (Hours) 3000 hours
Ripple Current @ High Frequency 1.3A @ 100kHz
Dissipation Factor 0.12 %
Diameter 8mm
Height 7mm
Height Seated (Max) 0.276 7.00mm
Length 7mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 82μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCX series. This part is mounted in the way of Surface Mount. The type of the PCX1C820MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~125°C. Nichicon PCX1C820MCL1GS is suitable to conduct the ripple current at 1.3A. PCX1C820MCL1GS Capacitor is mounted by PCB, Surface Mount. The typical values of Voltage - Rated DC are 16V. PCX1C820MCL1GS Capacitor. There are 262μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 16V. The voltage for the part is specified as 16V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 125°C.

PCX Series


Capacitance: 82μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~125°C

There are great quantities of applications of PCX1C820MCL1GS Aluminum Polymer Capacitors.


Typically, PCX1C820MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Decoupling Noise Filtering
  • DC Buffering
  • Motor Start
  • DC Link
  • DC/DC, DC/AC, and AC/AC converters
  • Flashtube Ignition
  • Power Line Buffering
  • To reduce power noise & signal noise
  • Coupling or blocking
  • Smoothing Noise Filtering

Write a review

Note: HTML is not translated!
    Bad           Good