banner_page

PCX1D121MCL1GS

PCX Series 120μF 20V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR)


  • Manufacturer: Nichicon
  • Nocochips NO: 555-PCX1D121MCL1GS
  • Package: Radial, Can - SMD
  • Datasheet: PDF
  • Stock: 246
  • Description: PCX Series 120μF 20V Aluminum Polymer Capacitors ±20% Radial, Can - SMD Surface Mount Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount PCB, Surface Mount
Mounting Type Surface Mount
Package / Case Radial, Can - SMD
Surface Mount Land Size 0.406Lx0.406W 10.30mmx10.30mm
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Published 2009
Series PCX
Size / Dimension 0.394Dia 10.00mm
Tolerance ±20%
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Type Polymer
Max Operating Temperature 125°C
Min Operating Temperature -55°C
Applications General Purpose
Voltage - Rated 20V
Capacitance 120μF
Voltage - Rated DC 20V
Lead Pitch 4.6mm
ESR (Equivalent Series Resistance) 35mOhm
Lead Diameter 1.1 mm
Voltage 20V
Lifetime @ Temp 3000 Hrs @ 125°C
Leakage Current 480μA
Ripple Current 1.8A
Life (Hours) 3000 hours
Ripple Current @ High Frequency 1.8A @ 100kHz
Dissipation Factor 0.12 %
Diameter 10mm
Height 8mm
Height Seated (Max) 0.315 8.00mm
Length 8mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 120μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCX series. This part is mounted in the way of Surface Mount. The type of the PCX1D121MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~125°C. Nichicon PCX1D121MCL1GS is suitable to conduct the ripple current at 1.8A. PCX1D121MCL1GS Capacitor is mounted by PCB, Surface Mount. The typical values of Voltage - Rated DC are 20V. PCX1D121MCL1GS Capacitor. There are 480μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 20V. The voltage for the part is specified as 20V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 125°C.

PCX Series


Capacitance: 120μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~125°C

There are great quantities of applications of PCX1D121MCL1GS Aluminum Polymer Capacitors.


Typically, PCX1D121MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Frequency Converters
  • Spot Welding
  • Power Line Buffering
  • Smoothing Noise Filtering
  • Server motherboards
  • Power Factor Correction
  • PFC
  • Flashtube Ignition
  • Decoupling Noise Filtering
  • Motor Control

Write a review

Note: HTML is not translated!
    Bad           Good