Parameters |
Factory Lead Time |
1 Week |
Mount |
PCB, Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
Radial, Can - SMD |
Weight |
500.000539mg |
Surface Mount Land Size |
0.327Lx0.327W 8.30mmx8.30mm |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Series |
PCX |
Size / Dimension |
0.315Dia 8.00mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
SMD/SMT |
Type |
Polymer |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Applications |
General Purpose |
Voltage - Rated |
25V |
Capacitance |
39μF |
Voltage - Rated DC |
25V |
Lead Pitch |
3.2mm |
ESR (Equivalent Series Resistance) |
55mOhm |
Lead Diameter |
1.1 mm |
Voltage |
25V |
Lifetime @ Temp |
3000 Hrs @ 125°C |
Leakage Current |
195μA |
Ripple Current |
1.2A |
Life (Hours) |
3000 hours |
Ripple Current @ High Frequency |
1.2A @ 100kHz |
Dissipation Factor |
0.12 % |
Diameter |
8mm |
Height |
7mm |
Height Seated (Max) |
0.276 7.00mm |
Length |
7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 39μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to PCX series. This part is mounted in the way of Surface Mount. The type of the PCX1E390MCL1GS capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~125°C. Nichicon PCX1E390MCL1GS is suitable to conduct the ripple current at 1.2A. PCX1E390MCL1GS Capacitor is mounted by PCB, Surface Mount. The typical values of Voltage - Rated DC are 25V. PCX1E390MCL1GS Capacitor. There are 195μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total. Voltage - Rated often has values of 25V. The voltage for the part is specified as 25V volts. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 125°C.
PCX Series
Capacitance: 39μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~125°C
There are great quantities of applications of PCX1E390MCL1GS Aluminum Polymer Capacitors.
Typically, PCX1E390MCL1GS is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Bypassing Noise Filtering
- PFC
- Voltage Doubling
- Coupling or blocking
- Motor Start
- Flashtube Ignition
- Smoothing Noise Filtering
- Lighting Ballast
- Motor Control
- Server motherboards