PD100MC0MP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Side View |
| Number of Pins | 2 |
| Operating Temperature | -30°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Power Dissipation | 75mW |
| Viewing Angle | 40° |
| Response Time | 10ns |
| Voltage - DC Reverse (Vr) (Max) | 20V |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Max Reverse Voltage (DC) | 20V |
| Reverse Breakdown Voltage | 20V |
| Wavelength | 820nm |
| Dark Current | 10nA |
| Spectral Range | 400nm ~ 1100nm |
| Current - Dark (Typ) | 10nA |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
PD100MC0MP Overview
The photodiodes are packaged in the Tape & Reel (TR) for protection. To ensure safety, the photodiodes are packaged in Side View packages. The maximum voltage that the photodiodes can tolerate in reverse-biased mode is 20V over a continuous period of time. Under reverse-bias mode, the voltage of the photodiodes should not exceed 20V. Pins 2 are present on the photodiodes. Photodiodes on a circuit are capable of emitting 75mW heat. During the operation of photodiodes, the temperature should not exceed 85°C. However, the photodiodes should be operated at a minimum temperature of -30°C. Anode voltage for the reverse anode of the photodiodes should be 20V. There is 10nA current flowing through a photodiode even in the absence of light input.
PD100MC0MP Features
Moisture Sensitivity Level (MSL): 3 (168 Hours)
Operating Temperature: -30°C~85°C
Packaging: Tape & Reel (TR)
Mount: Surface Mount
Spectral Range: 400nm ~ 1100nm
Response Time: 10ns
Viewing Angle: 40°
PD100MC0MP Applications
There are a lot of Sharp Microelectronics PD100MC0MP Photodiodes applications.
- Optical Switches
- Machine Controls
- Optical Analytics
- Solar Cells
- Electronic Equipment
- Shaft encoders
- High speed photo detectors
- Low Cost Light Monitoring
- Vision Controls
- Diode Laser Monitoring
