PD100MF0MP1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 2-SMD, No Lead |
| Number of Pins | 2 |
| Operating Temperature | -30°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Power Dissipation | 75mW |
| Viewing Angle | 40° |
| Response Time | 10ns |
| Voltage - DC Reverse (Vr) (Max) | 20V |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Max Reverse Voltage (DC) | 20V |
| Reverse Breakdown Voltage | 20V |
| Wavelength | 850nm |
| Dark Current | 10nA |
| Spectral Range | 680nm ~ 1100nm |
| Current - Dark (Typ) | 10nA |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
PD100MF0MP1 Overview
In order to protect these photodiodes from damage, they are packaged in the Tape & Reel (TR). It is necessary to enclose the photodiodes in 2-SMD, No Lead packages for safety purposes. A continuous reverse-bias mode can only sustain 20V voltage per photodiode. As long as the photodiodes are operated in reverse-bias mode, they should not exceed voltage 20V. Photodiodes have pins 2. Within a circuit, photodiodes could generate 75mW heat. During operation, photodiodes should not have a temperature higher than 85°C. However, the minimum operating temperature for the photodiodes should be set to -30°C. It should be 20V for the reverse anode voltage of the photodiodes. A photodiode conducts 10nA current without light input.
PD100MF0MP1 Features
Moisture Sensitivity Level (MSL): 2 (1 Year)
Operating Temperature: -30°C~85°C
Packaging: Tape & Reel (TR)
Mount: Surface Mount
Spectral Range: 680nm ~ 1100nm
Response Time: 10ns
Viewing Angle: 40°
PD100MF0MP1 Applications
There are a lot of Sharp Microelectronics PD100MF0MP1 Photodiodes applications.
- Pure UV-C Monitoring
- Photo interrupters
- Diode Laser Monitoring
- Industrial Automation
- Measurement Levelling
- Low Cost Light Monitoring
- Pulse Oximetry
- Machine Controls
- Shaft encoders
- Range finding
