PDU-S101
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-46-2 Metal Can |
| Housing Material | Metal |
| Operating Temperature | -40°C~125°C |
| Packaging | Bulk |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Lead Length | 12.7mm |
| Viewing Angle | 87° |
| Voltage - DC Reverse (Vr) (Max) | 20V |
| Breakdown Voltage | 30V |
| Rise Time | 5ns |
| Max Reverse Voltage (DC) | 20V |
| Wavelength | 280nm |
| Dark Current | 500pA |
| Spectral Range | 200nm ~ 400nm |
| Active Area | 0.08mm2 |
| Responsivity @ nm | 0.14 A/W @ 280nm |
| Diameter | 5.33mm |
| Height | 3.81mm |
| RoHS Status | Non-RoHS Compliant |
PDU-S101 Overview
To protect these photodiodes from damage, the Bulk is used. The photodiodes are put into TO-46-2 Metal Can packages for safety protection. Photodiodes can only withstand 20V in reverse-bias mode indefinitely. When reverse-biased, the photodiodes should not continually exceed 20V. Make sure photodiodes work with 30V breakdown voltage. There is 500pA current flowing through a photodiode even in the absence of light input.
PDU-S101 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~125°C
Packaging: Bulk
Mount: Through Hole
Spectral Range: 200nm ~ 400nm
Viewing Angle: 87°
Responsivity @ nm: 0.14 A/W @ 280nm
PDU-S101 Applications
There are a lot of Advanced Photonix PDU-S101 Photodiodes applications.
- Machine Controls
- Electronic Equipment
- Infrared data transmission
- Sterilization Lamp Monitoring
- Optical Analytics
- Pulse Oximetry
- Heart Rate Monitoring
- Diode Laser Monitoring
- Low Cost Light Monitoring
- Position sensing
