PDU-V103Q
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-46-2 Lens Top Metal Can |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Diode Type | PIN |
| Viewing Angle | 58° |
| Response Time | 400ns |
| Voltage - DC Reverse (Vr) (Max) | 75V |
| Max Reverse Voltage (DC) | 75V |
| Dark Current | 2pA |
| Spectral Range | 190nm ~ 1100nm |
| Active Area | 2.03mm2 |
| Responsivity @ nm | 0.18 A/W @ 254nm |
| RoHS Status | Non-RoHS Compliant |
PDU-V103Q Overview
To protect these photodiodes from damage, the Tray is used. It is necessary to place the photodiodes into TO-46-2 Lens Top Metal Can packages in order to protect them from damage. A continuous reverse-bias mode can only sustain 75V voltage per photodiode. It is recommended to set the reverse-bias mode for the photodiodes to not exceed 75V on a continuous basis. It is possible for a photodiode to operate at 2pA current even if no light is provided.
PDU-V103Q Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~125°C
Packaging: Tray
Diode Type: PIN
Mount: Through Hole
Spectral Range: 190nm ~ 1100nm
Response Time: 400ns
Viewing Angle: 58°
Responsivity @ nm: 0.18 A/W @ 254nm
PDU-V103Q Applications
There are a lot of Advanced Photonix PDU-V103Q Photodiodes applications.
- Electronic Equipment
- High speed photo detector
- Low Cost Light Monitoring
- Pure UV-C Monitoring
- LiDAR
- Shaft encoders
- Infrared data transmission
- Light Barriers
- Diode Laser Monitoring
- Sterilization Lamp Monitoring
