PDU-V104
| Parameters | |
|---|---|
| Max Reverse Voltage (DC) | 75V |
| Wavelength | 950nm |
| Dark Current | 5pA |
| Spectral Range | 350nm ~ 1100nm |
| Active Area | 3.09mm2 |
| Current - Dark (Typ) | 5pA |
| Responsivity @ nm | 0.18 A/W @ 365nm |
| Diameter | 4.67mm |
| Height | 3.81mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | TO-46-2 |
| Housing Material | Metal |
| Operating Temperature | -40°C~125°C |
| Packaging | Bulk |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Diode Type | PIN |
| Viewing Angle | 65° |
| Response Time | 13ns |
| Voltage - DC Reverse (Vr) (Max) | 75V |
| Breakdown Voltage | 10V |
| Rise Time | 450ns |
PDU-V104 Overview
It is important to note that these photodiodes are packaged in Bulk to prevent damage. Photodiodes are protected by TO-46-2 packages in order to ensure their safety. The maximum voltage the photodiodes can withstand in reverse-bias mode is 75V. Reverse-bias photodiodes should not be operated above 75V permanently. Photodiode operation should take place at temperatures below 125°C. But the photodiodes should operate at a temperature of -40°C. Ensure that the breakdown voltage of the photodiode is the same as 10V. Photodiodes exhibit 5pA current even in the absence of light input.
PDU-V104 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~125°C
Packaging: Bulk
Diode Type: PIN
Spectral Range: 350nm ~ 1100nm
Response Time: 13ns
Viewing Angle: 65°
Responsivity @ nm: 0.18 A/W @ 365nm
PDU-V104 Applications
There are a lot of Advanced Photonix PDU-V104 Photodiodes applications.
- LiDAR
- YAG laser detection
- Low Cost Light Monitoring
- Shaft encoders
- Diode Laser Monitoring
- Heart Rate Monitoring
- Light Barriers
- Position sensing
- Health Monitoring
- Industrial Automation
