PGA103UE4
| Parameters | |
|---|---|
| Dual Supply Voltage | 15V |
| Voltage Gain-Min | 1 |
| Input Voltage Noise Density | 11nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Voltage Gain-Max | 100 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Instrumentation Amplifier |
| Packing Method | TUBE |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Pin Count | 8 |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 9V |
| Operating Supply Current | 2.6mA |
| Nominal Supply Current | 2.6mA |
| Quiescent Current | 2.6mA |
| Slew Rate | 9 V/μs |
| Amplifier Type | INSTRUMENTATION AMPLIFIER |
| Current - Input Bias | 150nA |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 8 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1.5MHz |
| Min Dual Supply Voltage | 4.5V |
PGA103UE4 Overview
The linear amplifier is packaged in a SOIC case. There are two types of operational amplifiers in this circuit. In recent months, the number of terminations has approached 8. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. I would like to specify that this buffer amplifier belongs to the Instrumentation Amplifier-type of devices. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 1.5mV voltage. As long as the supply current of the chip does not exceed 2.6mA, this op amp ic can operate. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should not use op amp above 85°C . This linear amplifier has a total of 1 elements. This linear amplifier pack is based on the TUBE axis. This electric component can work from a voltage of under 36V as far as supply voltage is concerned. A voltage of 9V or higher is recommended for the linear amplifier's supply voltage. The dual supply voltage of 18V should be used for the conduct of this electronic component. As a result, linear amplifier's quiescent current is 2.6mA. There is a minimum voltage gain of 1 that this buffer op amp is capable of conducting. It is important to keep the resistance within the 100MOhm range of the linear amplifier.
PGA103UE4 Features
8 Pins
supply voltage of 15V
Resistance of 100MOhm
PGA103UE4 Applications
There are a lot of Texas Instruments PGA103UE4 Instrumentational OP Amps applications.
- Large motor controllers
- Video conversion and routing
- Television
- Portable electronic products powered by batteries
- Displayers for aircraft and air transportation control systems
- Medical imaging
- Strain gauges
- High gain DC amplifier
- Automatic control
- Blood pressure sensors
