PGA112AIDGSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | PGA112 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 330μA |
| Nominal Supply Current | 1mA |
| Quiescent Current | 1.1mA |
| Slew Rate | 8V/μs |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 1.5nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 325μV |
| Power Supply Rejection Ratio (PSRR) | 106.02dB |
| Voltage - Input Offset | 75μV |
| Settling Time | 2.55 μs |
| -3db Bandwidth | 10MHz |
| Input Voltage Noise Density | 13nV/sqrt Hz |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PGA112AIDGSR Overview
It is packaged in an 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Programmable Gain-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 10. A total of 10 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Other Analog ICs device. The buffer op amp includes 10 pins. Op amp ic rates 325μV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. This op amp can operate from a supply current at 330μA. On this instrumentation amplifier, there are 1 circuits that are connected together. As far as the device is concerned, buffer amplifier has 2 channels. On the output type, there are Rail-to-Rail different types of op amps. Buffer amplifier has a quiescent current of 1.1mA. 10GOhm should be the range of resistance for the linear amplifier. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
PGA112AIDGSR Features
10 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 10GOhm
PGA112AIDGSR Applications
There are a lot of Texas Instruments PGA112AIDGSR Instrumentational OP Amps applications.
- Automotive sensors
- Exponential operation circuits
- Semiconductor detectors
- Industrial control system
- Commercial audio systems
- Communication
- Ultrasound transducers
- Logarithmic operation circuits
- Portable media players
- Gaming industry
