PGA113AIDGSR
| Parameters | |
|---|---|
| Nominal Supply Current | 1mA |
| Quiescent Current | 1mA |
| Slew Rate | 8V/μs |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 1.5nA |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V |
| Output Current per Channel | 60mA |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 325μV |
| Bandwidth | 10MHz |
| Power Supply Rejection Ratio (PSRR) | 106.02dB |
| Voltage - Input Offset | 75μV |
| Settling Time | 2.55 μs |
| Input Voltage Noise Density | 13nV/sqrt Hz |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | PGA113 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 330μA |
PGA113AIDGSR Overview
It is packaged in an 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Programmable Gain-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 10. Linear amplifier has a total of 10 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Other Analog ICs op amp ic can be identified by the fact that this is a type of Other Analog ICs device. A total of 10 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 325μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 330μA . A linear amplifier like this has 1 circuits on it. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There is a quiescent current of 1mA in this operational amplifier circuit. Linear amplifier resistance should stay within the range of 10GOhm. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
PGA113AIDGSR Features
10 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 10GOhm
PGA113AIDGSR Applications
There are a lot of Texas Instruments PGA113AIDGSR Instrumentational OP Amps applications.
- Broadcasting
- Displayers for aircraft and air transportation control systems
- Video conversion and routing
- Power transmission
- Biopotential
- Radar
- Information processing
- Radiation thermometry transducers
- Professional videography
- Comparator
