PGA202KP
| Parameters | |
|---|---|
| Base Part Number | PGA202 |
| Pin Count | 14 |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.5mA |
| Power Dissipation | 750mW |
| Output Current | 10mA |
| Quiescent Current | 6.5mA |
| Slew Rate | 20V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 12V~36V ±6V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Voltage - Input Offset | 500μV |
| Gain | 1000 dB |
| Settling Time | 2 μs |
| -3db Bandwidth | 1MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.000025μA |
| Input Voltage Noise Density | 12nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.06% |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 750mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
PGA202KP Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case. Instrumentation-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins. Please take in mind that op amp should be run at 15V. An 14-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 2mV voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. According to the manufacturer, this buffer op amp works well at -25°C~85°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 6.5mA . The voltage gain should stay at 60dB. 1 channels are available on the instrumentation amplifier. There is an 6.5mA quiescent current running through op amp ic. The op amp resistance should stay within the range of 10GOhm.
PGA202KP Features
14 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm
PGA202KP Applications
There are a lot of Texas Instruments PGA202KP Instrumentational OP Amps applications.
- ECG equipment
- Video data acquisition
- Medical imaging
- Instrumentation
- Vehicle electronics
- Tablets
- Television
- Proportional operation circuits
- High/low-pass filter circuit
- High speed sample
