PGA202KPG4
| Parameters | |
|---|---|
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | PGA202 |
| Pin Count | 14 |
| Number of Elements | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.5mA |
| Power Dissipation | 750mW |
| Quiescent Current | 6.5mA |
| Slew Rate | 20V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 12V~36V ±6V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Settling Time | 2 μs |
| -3db Bandwidth | 1MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.000025μA |
| Input Voltage Noise Density | 12nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.06% |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 750mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
PGA202KPG4 Overview
Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. Op amps are Instrumentation types of amplifier on the chip. The op amp is delivered to you in a Tube case. There have been a total of 14 terminations over the past year. Linear amplifier has a total of 14 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. The buffer op amp includes 14 pins. There is an input offset voltage of 500μV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -25°C~85°C . An 6.5mA volt supply current is needed for this linear amplifier to operate. Maintain 60dB as the voltage gain. The op amp is rated for an operating supply voltage of 1. There is an 6.5mA quiescent current running through op amp ic. It is important that the op amp resistance stays within the range of 10GOhm.
PGA202KPG4 Features
14 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm
PGA202KPG4 Applications
There are a lot of Texas Instruments PGA202KPG4 Instrumentational OP Amps applications.
- High speed sample
- Medical instruments
- Automatic control
- Active probe
- Blood pressure sensors
- Strain gauges
- High gain DC amplifier
- earphone
- Portable media players
- Band-pass filter
