Parameters |
Input Offset Current-Max (IIO) |
0.000025μA |
Input Voltage Noise Density |
12nV/sqrt Hz |
Voltage Gain-Nom |
8 |
Non-linearity-Max |
0.06% |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
14 |
Operating Temperature |
-25°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
10GOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Power Dissipation |
750mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
2.54mm |
Base Part Number |
PGA203 |
Pin Count |
14 |
Number of Channels |
1 |
Operating Supply Current |
6.5mA |
Nominal Supply Current |
6.5mA |
Power Dissipation |
750mW |
Output Current |
10mA |
Quiescent Current |
6.5mA |
Slew Rate |
20V/μs |
Amplifier Type |
Instrumentation |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
10pA |
Voltage - Supply, Single/Dual (±) |
12V~36V ±6V~18V |
Output Current per Channel |
10mA |
Input Offset Voltage (Vos) |
500μV |
Bandwidth |
1MHz |
Gain Bandwidth Product |
1MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Voltage Gain |
18.06dB |
Average Bias Current-Max (IIB) |
0.00005μA |
Gain |
8 dB |
Settling Time |
2 μs |
-3db Bandwidth |
1MHz |
Dual Supply Voltage |
15V |
PGA203KP Overview
It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp ic of the Instrumentation type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 15V battery. There are 14 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. The mounting type that is recommended for this electrical part is Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -25°C~85°C . You can run this op amp ic on 6.5mA . The voltage gain should stay at 18.06dB. Op amp ic has 1 channels. 6.5mA quiescent currents are flowing through buffer op amp. It is important to keep the resistance within the 10GOhm range of the linear amplifier.
PGA203KP Features
14 Pins
supply voltage of 15V
18.06dB voltage gain
Resistance of 10GOhm
PGA203KP Applications
There are a lot of Texas Instruments PGA203KP Instrumentational OP Amps applications.
- Voltage regulation circuit
- Blood pressure sensors
- Band-stop filter
- Commercial audio systems
- Multiplication circuits
- Division circuits
- Medical imaging
- Semiconductor detectors
- Laptop
- Professional videography