PGA204AUG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PGA204 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 5.2mA |
| Nominal Supply Current | 7.5mA |
| Quiescent Current | 5.2mA |
| Slew Rate | 0.7V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 23mA |
| Input Offset Voltage (Vos) | 25μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Settling Time | 140 μs |
| -3db Bandwidth | 1MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.002μA |
| Input Voltage Noise Density | 13nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.02% |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PGA204AUG4 Overview
The linear amplifier is packaged in a 16-SOIC (0.295, 7.50mm Width) case. Buffer amps of this type are called Instrumentation-types. A Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 16 terminations. Buffer amplifier has a total of 16 pins on it. It is important to remember that this op amp should be operated at a voltage of 15V volts. In total, the buffer amplifier consists of 16 pins. Op amp rates 25μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureAn 5.2mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 60dB. In total, there are 1 circuits on this buffer amplifier. There are 3 elements in this buffer amplifier. There is a quiescent current of 5.2mA in this operational amplifier circuit. It is important to keep the resistance within the 10GOhm range of the op amps.
PGA204AUG4 Features
16 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm
PGA204AUG4 Applications
There are a lot of Texas Instruments PGA204AUG4 Instrumentational OP Amps applications.
- High gain DC amplifier
- Differentiator circuits
- Broadcasting
- High input resistance broadband
- Division circuits
- Communication device
- Scintillation detectors
- pH (acidity)
- Medical instruments
- Fission chambers
