PGA205AP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | PGA205 |
| Pin Count | 16 |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 5.2mA |
| Nominal Supply Current | 7.5mA |
| Max Supply Current | 7.5mA |
| Quiescent Current | 5.2mA |
| Slew Rate | 0.7V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 23mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 18.06dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Voltage - Input Offset | 25μV |
| Gain | 8 dB |
| Settling Time | 28 μs |
| -3db Bandwidth | 1MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.002μA |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Voltage Gain-Nom | 2 |
| Non-linearity-Max | 0.004% |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PGA205AP Overview
The linear amplifier is packaged in a 16-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Buffer amps of this type are called Instrumentation-types. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 16 terminations over the past year. A total of 16 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In total, the buffer amplifier consists of 16 pins. In terms of input offset voltage, operational amplifier rates 125μV. Through Hole is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureOperational amplifier can operate supply current at 5.2mA. It is recommended to keep the voltage gain at 18.06dB at all times. Instrumentation amplifier has 1 channels on it. The op amp is rated for an operating supply voltage of 3. There is an 5.2mA quiescent current in linear amplifier. Linear amplifier resistance should stay within the range of 10GOhm.
PGA205AP Features
16 Pins
supply voltage of 15V
18.06dB voltage gain
Resistance of 10GOhm
PGA205AP Applications
There are a lot of Texas Instruments PGA205AP Instrumentational OP Amps applications.
- Test equipment
- Commercial audio systems
- Signal operation
- RF cable systems
- Portable electronic products powered by batteries
- Industrial control system
- Cinema or auditorium audio system
- PDA
- Instrumentation
- Inverse/same-phase proportional circuit
