PGA206PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | PGA206 |
| Pin Count | 16 |
| Number of Circuits | 1 |
| Operating Supply Current | 12.4mA |
| Nominal Supply Current | 13.5mA |
| Max Supply Current | 12mA |
| Quiescent Current | 12.4mA |
| Slew Rate | 25V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 17mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 5MHz |
| Gain Bandwidth Product | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage - Input Offset | 1mV |
| Gain | 8 dB |
| Settling Time | 3.5 μs |
| -3db Bandwidth | 5MHz |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 18nV/sqrt Hz |
| Number of Amplifiers | 3 |
| Voltage Gain-Nom | 2 |
| Non-linearity-Max | 0.005% |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PGA206PA Overview
There is a 16-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There are a total of 16 pins on this op amp. Please take in mind that op amp should be run at 15V. There are 16 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 12.4mA , this buffer op amp will be able to operate. A instrumentation amplifier like this has 1 circuits. Linear amplifier has a quiescent current of 12.4mA. The buffer amplifier consists of 3 amplifiers.
PGA206PA Features
16 Pins
supply voltage of 15V
PGA206PA Applications
There are a lot of Texas Instruments PGA206PA Instrumentational OP Amps applications.
- Band-stop filter
- High speed sample
- Vehicle electronics
- Addition operation circuits
- Displayers for aircraft and air transportation control systems
- Signal amplification
- Signal transformation
- Video computer boards
- Division circuits
- Portable electronic products powered by batteries
