PH18CNR65PASA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Number of Pins | 4 |
| Housing Material | ABS |
| Operating Temperature | -25°C~60°C |
| Published | 2012 |
| Series | PH |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IP67, IP69K |
| Output Configuration | PNP |
| Cable Length | 78.74 2m |
| Output Current | 100mA |
| Response Time | 1ms |
| Adjustment Type | Adjustable, 210° Turn Potentiometer |
| Sensing Distance | 255.906 (6.5m) |
| Sensing Method | Retroreflective |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (850nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Ratings | IP66 |
PH18CNR65PASA Overview
In order for the photoelectric sensor to work reliably, it should be set to -25°C~60°C degrees Celsius. Electronic components should be connected to a circuit or system by 10V~30V voltage. A photoelectric sensor should have a response time of 1ms. To make the photoelectric sensor work properly, 4 pins must be connected. A photoelectric sensor must have an output current of 100mA. A photoelectric sensor can be operated at a maximum voltage of 30V in a DC circuit without damage occurring. As low a voltage as possible, such as 10V, can be used for this photoelectric sensor.
PH18CNR65PASA Features
Sensing Distance: 255.906 (6.5m)
4 pins
Response Time: 1ms
Operating Temperature: -25°C~60°C
PH Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
PH18CNR65PASA Applications
There are a lot of Carlo Gavazzi Inc. PH18CNR65PASA Photoelectric Sensors applications.
- Detecting colours
- detect objects
- Zone scanners
- Checking objects on production lines or conveyors
- Pharmaceutical industry
- Luminescence sensors
- Measuring distance
- Automotive industry
- Mechanical engineering
- Counting small objects
