PI3A223ZMEX

13ns, 38ns (Typ) SPDT 750mOhm QUAD Analog Switches BREAK-BEFORE-MAKE 3V 10-UFQFN

Manufacturer: Diodes Incorporated
Nocochips NO: 233-PI3A223ZMEX
Package: 10-UFQFN
Datasheet: PDF
Stock: 650
Description: 13ns, 38ns (Typ) SPDT 750mOhm QUAD Analog Switches BREAK-BEFORE-MAKE 3V 10-UFQFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-UFQFN
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	1997
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	750mOhm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	250mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.4mm
Time@Peak Reflow Temperature-Max (s)	30
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	4.2V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	3μA
Max Supply Current	7μA
Turn On Delay Time	25 ns
Supply Type	Single
Turn-Off Delay Time	10 ns
-3db Bandwidth	84MHz
On-State Resistance (Max)	750mOhm
High Level Output Current	300mA
Low Level Output Current	300mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	39 dB
Channel Capacitance (CS(off), CD(off))	20pF 20pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	13ns, 38ns (Typ)
Charge Injection	50pC
Channel-to-Channel Matching (ΔRon)	50m Ω (Typ)
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~4.2V
Height Seated (Max)	0.6mm
Length	1.8mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

PI3A223ZMEX Overview

This electronic part is conveniently packaged in 10-UFQFN, making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 10. A 1 channel electronic part produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. These analog multiplexers are built based on SPDT switching circuits. There are 2 circuits in this switch device. The internal resistance of this digital multiplexer is 750mOhm. You can find the functions of the 10 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 4.2V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 1.65V. In order to operate this switch device, it would need a current of 1μA. Analogue multiplexers require a 1.65V~4.2V voltage to drain from a single voltage supply. A voltage higher than 7μA may cause damage to the switch multiplexer.