PI3A268CZMEX

50ns, 50ns SPDT 400mOhm Typ QUAD Analog Switches BREAK-BEFORE-MAKE PI3A268 1μA 2.7V 10-UFQFN

Manufacturer: Diodes Incorporated
Nocochips NO: 233-PI3A268CZMEX
Package: 10-UFQFN
Datasheet: PDF
Stock: 669
Description: 50ns, 50ns SPDT 400mOhm Typ QUAD Analog Switches BREAK-BEFORE-MAKE PI3A268 1μA 2.7V 10-UFQFN(Kg)

Details

Tags

Parameters
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	50ns, 50ns
Charge Injection	52pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-80dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	85ns
Switch-off Time-Max	85ns
Voltage - Supply, Single (V+)	1.65V~4.3V
Height Seated (Max)	0.55mm
Length	1.8mm
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-UFQFN
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2011
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	400mOhm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.4mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	PI3A268
Output	SEPARATE OUTPUT
Qualification Status	Not Qualified
Operating Supply Voltage	3V
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	4.3V
Min Supply Voltage	1.65V
Operating Supply Current	500nA
Supply Type	Single
-3db Bandwidth	85MHz
On-State Resistance (Max)	400mOhm Typ
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	1μA
Channel Capacitance (CS(off), CD(off))	21pF
On-state Resistance Match-Nom	0.1Ohm

PI3A268CZMEX Overview

Packed in 10-UFQFN, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 10. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 2.7V volts, the electrical part can be powered up and run. Multiplexers built on a SPDT switching circuit are built. There are 2 circuits in this switch device. Use PI3A268 to search for variants of the digital switches. A 400mOhm internal resistance characterizes this multiplexer. Datasheets for 10 pin functions are available upon request. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 4.3V voltage to the switch device. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 1.65V. The switch device would be able to operate with 500nA current. Analogue multiplexers require a 1.65V~4.3V voltage to drain from a single voltage supply. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. It can operate from 3V operating voltages.