PI3B16233AE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 740.007602mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 16233 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 8 x 1:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 3 |
| Power Dissipation | 500mW |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 32 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3B16233AE Overview
In order to conserve board space, digital switch is included in the 56-TFSOP (0.240, 6.10mm Width).Tube represents its packaging.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~3.6V voltage.There is a design for terminating 56 as part of its basic configuration.There is a base part number 16233 that can be used to locate signal switch's related components as well.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemAs a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.Currently, it is configured with 56 pins.It is positioned in the direction of Surface Mount.The logic switch object belongs to the family of CBTLV/3B.Signal multiplexer consists of 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The turn signal switch operates with 16 outputs.The digital switch ic is a part of an electronic system classified as Other Logic ICs.Without external influences, it consumes 10μA current of multiplexer ic.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.The multiplexer is equipped with 32 inputs.The signal switching operates with a resistance of 3.
PI3B16233AE Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B16233AE Applications
There are a lot of Diodes Incorporated PI3B16233AE Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Night vision cameras
- High-performance memory systems
- Computer memory
- Enabling block of memory depending on address in memory chips
- Injectors
- Signal router
- Metal detectors
- Make half adder
- Implementing boolean functions with multiple variables
