PI3B16233AEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 10Ohm |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 16233 |
| Operating Supply Voltage | 3.3V |
| Circuit | 8 x 1:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 3 |
| Number of Bits | 32 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Number of Output Lines | 16 |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PI3B16233AEX Overview
In order to save board space, digital switch is located in the 56-TFSOP (0.240, 6.10mm Width).The package is packaged in the manner of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The multiplexers uses an analog IC Multiplexer/Demultiplexer as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 3V~3.6V, designers are provided with a greater degree of flexibility.Among its basic configurations are 56 terminations.The base part number is 16233, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 3.3V volts.Conductors terminate at GULL WING in this design.There is a type of supply of Single.There are 56 pins on it.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the family of CBTLV/3B.As a result, signal multiplexer provides 32 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 3V.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.There are no external influences on this multiplexer ic, so it consumes 10μA current.Providing a supply voltage of 3.3V can provide reliable performance of the multiplexers.3 ports are used for some other peripheral signal switchings to plug in.A resistance of 10Ohm is used to operate the signal switching.As a signal source, there are 16 output lines.
PI3B16233AEX Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
16 output lines
PI3B16233AEX Applications
There are a lot of Diodes Incorporated PI3B16233AEX Signal Switches / Multiplexers / Decoders applications.
- High-performance memory-decoding applications
- Analog, digital or video signal switching
- Logic circuits
- CPU memory location identification
- LVDS
- HDMI applications
- Logic gates for other digital devices
- Electronics industry
- Night vision cameras
- D/A converters
