PI3B16244AE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 16244 |
| Operating Supply Voltage | 3.3V |
| Circuit | 4 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3B16244AE Overview
As a means of saving space, digital switch is provided in the 48-TFSOP (0.240, 6.10mm Width).Tube is the packaging method.For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 3V~3.6V supply voltage.Among its basic features are 48 terminations.The part number for 16244 can be used to find its logic switch related parts as well.The multiplexer's system works with 3.3V voltage.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Single is employed as the supply type.A total of 48 pins are configured on this board.Surface Mount is the way it is mounted.I would like to refer to the logic switch as a member of the CBTLV/3B family.In the signal multiplexer, there are 16 bits available.To avoid unnecessary failures, keep the supply voltage at 3V (Vsup).In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 10μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 3.3V.As far as the resistance is concerned, it operates with 2.As far as the resistance is concerned, it operates with 10Ohm.
PI3B16244AE Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B16244AE Applications
There are a lot of Diodes Incorporated PI3B16244AE Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Analog, digital or video signal switching
- Make half adder
- High-performance memory-decoding applications
- Microprocessor memory systems
- Metal detectors
- Home automation system
- Recording transmission
- VGA
- Data bus control
