PI3B3125LE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3125 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 4 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3B3125LE Overview
Digital switch is provided in the 14-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.The package is packaged in accordance with Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 3V~3.6V, designers have greater flexibility of digital controlled switch.There is a design for terminating 14 as part of its basic configuration.In addition, it also has a base part number of 3125, which can be used to find related parts.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemAs a result, conductors end at GULL WING.In this case, Single is employed as the supply type.With 14 pins, it is configured.It is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.There are 4 bits in signal multiplexer.Keeping the minimum supply voltage (Vsup) at 2.97V prevents some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.63V in order to prevent some unnecessary failures.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Without any external influences, it consumes 3μA current of multiplexer ic at all times.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.2 ports are used for some other peripheral signal switchings to plug in.A resistance of 10Ohm is used to operate the signal switching.This mux switch configuration has 4 elements.
PI3B3125LE Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B3125LE Applications
There are a lot of Diodes Incorporated PI3B3125LE Signal Switches / Multiplexers / Decoders applications.
- Solenoid cooling fan
- Combinational circuit
- Paper plants
- Textile mills
- Speed control of medern motors
- Small scale TV wall
- Make half adder
- A/D converters
- To select different devices in microprocessor output
- GLAN
