PI3B3125LEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | PI3B3125 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PI3B3125LEX Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 14-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.The method digital switch ic adopts for mounting is Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 3V~3.6V.provides digital controlled switch's digital controlled switch'sThe basic configuration includes 14 terminations.The base part number is PI3B3125, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 3.3V is supplied.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a supply type of Single employed as part of this supply.It is configured with 14 pins.Surface Mount is the way it is mounted.The logic switch is a member of the family of CBTLV/3B.In this signal multiplexer, there are 1 bits that are provided.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.97V.It is advisable to keep the maximum supply voltage (Vsup) at 3.63V in order to prevent some unnecessary failures.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.As far as the resistance is concerned, it operates with 10Ohm.
PI3B3125LEX Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B3125LEX Applications
There are a lot of Diodes Incorporated PI3B3125LEX Signal Switches / Multiplexers / Decoders applications.
- GLAN
- A robotic vehicle with the metal detector
- Computer memory
- Data-routing applications
- To select different task for memory in microprocessor memory systems
- Telephone network
- Frequency multiplexing system
- Encrypted communications system
- Logic gates for other digital devices
- Enabling different rows of memory depending on address in memory chips
