Parameters |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2004 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
10Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
3125 |
Operating Supply Voltage |
3.3V |
Number of Elements |
4 |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.97V |
Number of Ports |
2 |
Number of Bits |
4 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
4 ns |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-120mA |
Low Level Output Current |
120mA |
Voltage Supply Source |
Single Supply |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
PI3B3125WE Overview
In order to conserve board space, digital switch is included in the 14-SOIC (0.154, 3.90mm Width).The package is in the form of Tube.In terms of mounting, digital switch ic uses the Surface Mount method .Bus Switch is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 3V~3.6V, designers are provided with a greater degree of flexibility.It is designed with 14 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 3125 may also be used.In multiplexer's system, 3.3V is the voltage supplied.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.A configuration of 14 pins is used.This unit is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.As a result, signal multiplexer provides 4 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.97V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.63V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 3.3V is provided.The system operates with a resistance of 2.With a resistance of 10Ohm, it operates.The mux switch configuration contains 4 elements.
PI3B3125WE Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B3125WE Applications
There are a lot of Diodes Incorporated PI3B3125WE Signal Switches / Multiplexers / Decoders applications.
- Data distribution
- GLAN
- Transmission from the computer system of a satellite
- Data collection system
- PCIe
- VGA
- To select different devices in microprocessor output
- Automatic health monitoring systems
- Data communication
- Logic gates for other digital devices