PI3B3125WEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PI3B3125 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 4 ns |
| Family | CBTLV/3B |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3B3125WEX Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 14-SOIC (0.154, 3.90mm Width).It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC used in the multiplexers can be referred to as Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 3V~3.6V, designers have greater flexibility of digital controlled switch.Its basic configuration includes terminations in the 14 range.Its logic switch base part number is PI3B3125 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 3.3V voltage.A conductor terminates at GULL WING.There is a supply type of Single employed as part of this supply.With 14 pins, it is configured.It is positioned in the direction of Surface Mount.Among the family of CBTLV/3B the logic switch is a member.As a result, signal multiplexer provides a total of 4 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.97V to avoid some unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 3.63V to avoid some unnecessary failures.The part belongs to the Bus Driver/Transceivers category of signal switches.Without any external influences, it consumes 3μA current of multiplexer ic at all times.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.As far as the resistance is concerned, it operates with 2.This signal switching operates at a resistance of 10Ohm.In mux switch configuration, there are 4 elements.
PI3B3125WEX Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B3125WEX Applications
There are a lot of Diodes Incorporated PI3B3125WEX Signal Switches / Multiplexers / Decoders applications.
- Automation system
- Decimal decoder
- Enabling different rows of memory depending on address in memory chips
- Medical industry
- Signal router
- Robotic vehicles
- Recording transmission
- Small scale TV wall
- Data transfer
- Make half adder
