PI3B3126LEX
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | PI3B3126 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 4 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
PI3B3126LEX Overview
Due to the fact that it is provided in the 14-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged according to the Tape & Reel (TR) method.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses an analog IC Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 3V~3.6V supply voltage, which gives it a lot of flexibility.The basic configuration of this system includes 14 terminations.You can also find related parts by using its logic switch base part number of PI3B3126.For multiplexer's system, a voltage of 3.3V is supplied.Conductors terminate at GULL WING in this design.Single is used as its supply type.A configuration of 14 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.The CBTLV/3B family includes the logic switch.There are 1 bits signal multiplexer provides.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.97V.Avoid unnecessary failures by keeping Vsup at 3.63V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 3μA current.Reliable performance of the multiplexers can be achieved when a supply voltage of 3.3V is provided.This signal switching operates at a resistance of 2.A resistance of 10Ohm is used to operate the signal switching.There are 4 elements used for the mux switch configuration.
PI3B3126LEX Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
PI3B3126LEX Applications
There are a lot of Diodes Incorporated PI3B3126LEX Signal Switches / Multiplexers / Decoders applications.
- Transmission from the computer system of a satellite
- Data communication
- Metal detectors
- Image transmission
- Enabling block of memory depending on address in memory chips
- Code converters
- Speed synchronization of multiple motors in industries
- High-performance memory systems
- Analog to digital conversion
- Idle motor
